Hydraulic Submersible Sediment Pump Equipped on Excavator was Used for River Dredging

Hydraulic submersible sediment pump is the new sediment pump type which is developed and designed by Tai’an Ocean Pump Co., Ltd. (OCEAN Pump) according to 20 years experience and actual construction requirements. Hydraulic submersible sediment pump can be driven by a hydraulic power station or the hydraulic system of the excavator. It is suitable for urban rivers, lake and pond dredging, and can also be equipped with two or three sets of side agitators according to construction requirements. The side agitators can stir the hard sediment and increase the transportation concentration. The hydraulic sediment pump casing and impeller can be customized when there is much garbage in the river or lake to guarantee passibility.

Hydraulic Submersible Sediment Pump Selection Overview

One customer from Gansu undertook a river cleanup project. The water depth is about 2 meters, the sand layer is relatively hard, the discharge distance is about 200 meters. Previously, the customer dug sand with excavators, then transported by vehicles. However, this method was not only inefficient, but also had a relatively large pollution to the surrounding environment, and there were many complaints from surrounding residents. So the customer required a method which was more efficient and environmentally friendly to replace the current working way. The customer contacted OCEAN Pump for a suitable sand pump machine. After detailed communication, OCEAN Pump engineers conducted serious sand extracting equipment selection according to the actual requirements. In the end, OCEAN Pump recommended hydraulic submersible dredging pump. The hydraulic submersible sediment pump can be directly installed on the excavator, and the sediment pump is driven by the hydraulic system of the excavator. Compared with the traditional hydraulic pumping station, hydraulic system of excavator has the features of easy moving, less investment, easy installation. The sand is piped to the sediment recovery site, and no leakage occurs during conveying.
After studying the hydraulic submersible sediment pump produced by OCEAN Pump and watching the working videos, the customer finally selected OCEAN Pump as his partner and signed a contract.

The hydraulic submersible sediment pump manufactured by OCEAN Pump has the following advantages compared with the submersible slurry pump driven by electric motor.

1. The hydraulic transmission has small inertia and fast response speed, which can realize a wide range of speed regulation. With hydraulic shunt and collecting valve, no additional hydraulic control facilities are required for customers.
2. Overload protection can be realized automatically, and there is no burning phenomenon.
3. High concentration of solids such as mortar, sediment and slag.
4. Lower failure rate.

The hydraulic submersible sediment pump designed and produced by OCEAN Pump has been highly praised by customers since it was put into use. The customer does not need increase investment to purchase equipment. The excavator bucket and hydraulic submersible sediment pump can be replaced by each other according to customer’s actual requirements which can meet the requirements of less investment and high output.

About Ocean Pump

As the New Hi-tech Enterprise Certificated  by the Government, Tai'an Ocean Pump Co., Ltd. (OCEAN Pump) is the leading sand pump manufacturer, supplier and exporter in China. We have more than 30 talented sand pump experts and 15,000 square meters factory. More than 4 series 20 kinds of sand pumps, slurry pumps, sand dredgers and related parts has been manufactured to satisfy your pumping requirements. Product innovation and customer satisfaction are our continuous commitment to all our partners. We has always worked hard to become the leader in supplying the sand, slurry, gravel pumping and dredging solutions and related parts.