One customer from Hunan signed a local sludge treatment project. There are 14 sludge pools which are 8 m deep, 5 m long and 5 m wide. The sludge contains a small amount of sand. The required discharge distance is 150 m and sediment capacity is 20 m3/h. When contacted OCEAN Pump engineers, the customer requested the sand pump machine should has the features of good wear resistance and convenient operation. Our engineers recommended the sub dewatering pump.
Sub Dewatering Pump ZJQ 100-18-11 parameters
Flow | 100 m³/h |
Head | 18 m |
Power | 11 kw |
Speed | 1450 rpm |
After studying the submersible slurry pump and watching the on-site using video, the customer finally approved the plan provided by OCEAN Pump and signed purchase contract for 2 sets submersible slurry pumps.
The submersible sediment pumps were delivered to the customer’s designated working site on August 14th, 2019. The next day, the workers started to carry out running test. One of the sludge pools’ mud concentration is about 60% which is a little higher, so the customer used high pressure water to impact the mud to improve sludge fluidity. After one hours’ running, the extracted sludge concentration was 40%, and there was no blockage. The sub dewatering pump fully meets the customer’s requirements. Therefore, the customer ordered another 4 sets sub dewatering pumps to improve the working efficiency.
The submersible sediment pumps were delivered to the customer’s designated working site on August 14th, 2019. The next day, the workers started to carry out running test. One of the sludge pools’ mud concentration is about 60% which is a little higher, so the customer used high pressure water to impact the mud to improve sludge fluidity. After one hours’ running, the extracted sludge concentration was 40%, and there was no blockage. The sub dewatering pump fully meets the customer’s requirements. Therefore, the customer ordered another 4 sets sub dewatering pumps to improve the working efficiency.
没有评论:
发表评论