40 Sets Submersible Sewage Pumps were Delivered to Singapore

Submersible sewage pump is equipped with the automatic stirring device which can produces a strong stirring force with the rotation of the motor shaft. The precipitate in the waste water is stirred into suspended solids and sucked in the submersible sewage pump. The submersible sewage pump improves the capacity of anti-blocking and sewage discharge ability. It completes the water draining, sewage discharge, and sediment clearing. The main components of submersible sewage pump are the impeller, pump body, and submersible system unit. It puts the electrical motor and mechanical pump on the same axis and can suck surface residual sewage efficiently. The impeller is designed with big channels, which greatly improves the flow capacity of the dirt and can pass through solid particles effectively.

Features of Submersible Sewage Pump

1. Flood-proof motor with the IP 68 protection class and F insulation class.
2. The unique wide-flow impeller design ensures that the pump has a strong pass-ability, also ensures a high head.
3. The special design of the cable connector is reliable to avoid any liquid ingress.

An automatic protection device and control case ensure the good performance.

Here are Parameters of Submersible Sewage Pump
In June 2019, we got a very clear inquiry with specified sewage pumping data. The customer wanted the submersible dewaterintg pump to suck the sewage water from a small tank. This customer is an engineer at a Singapore Water Treatment Company. He wanted two models of submersible dewatering pumps, one model has a flow rate of around 20 cubic meters per hour, the head is 10 meters, the outlet diameter is 50 mm. The other one has the flow rate 40 cubic meters per hour, the outlet diameter is 65 mm. He also required an industrial voltage frequency of 400 V, 50 HZ. According to the customer’s request, we selected two models for the customer.

Model	50 QW 20-12-1.5	65 QW 40-7-2.2
Power	1.5 kw	2.2 kw
Flow	20 m³/h	40 m³/h
Head	12 m	7 m
Speed	2890 rpm	2890 rpm
Outer diameter	50 mm	65 mm
Industrial voltage frequency	400 V / 50 HZ	400 V / 50 HZ
Cable length	8 m	8 m

We provided detailed submersible sewage pump parameters and pictures to the engineer, the engineer was very satisfied with our parameters. After communication, each sand pump machine needed to be equipped with 8 meters cable and an elbow. After the discussion, the procurement department of the company contacted us and ordered 20 units each model. The total were 40 units. We successfully tested every submersible sewage pump, each one was packed in a small wooden box. In order to facilitate transportation, we put all the small wooden boxes into a big wooden box.

OCEAN Pump has its own 15,000 square meters state-of-art manufacturing factory. In recent years, we had invested more than 700,000 dollars into our modern manufacturing factory to improve the basic production facilities, working conditions, employee salary and welfare, technical and teamwork training, etc. Our modern slurry pump factory is equipped with advanced machines like cast molding machine, CNC milling machines, castings Composition analysis tester, electric heat treatment stove and other special machines, which help us to keep high product quality, shorter delivery time and competitive cost to meet the demands of our worldwide customers. Welcome to visit our factory.